How can restore balance when a ceiling fan blade wobble？
Ceiling fans in operation, due to the blade or blade bracket is not neat, sometimes may appear swing shaking, the following 6 ways to help you solve the ceiling fan blade shaking problem:
1. Check the blade and blade holder for damage.
Make sure that each blade is securely attached to its holder and that the blade holder are not bent out of shape. If the blades and blade holder are damaged, replace them to restore them to normal use.
2. Check the blade surface for dust and foreign objects.
A large accumulation of dust can cause an increase in the weight of the blades and can lead to serious misalignment of the blades. Clean the blades and the connection between the blades and the forks with cleaning agent.
3. Tighten the screws of the blades.
Loose screws will make a gap between the blades and the motor connection, dust enters and not only affects the balance of the ceiling fan, but also relates to the safety of using the ceiling fan.
Regular warranty ceiling fans should also not forget to check the tightness of the screws.
4. Measure the value of the blade to the ceiling.
1、Ruler adjustment:
Check with a long graduated ruler, align the ruler upwards to the vertical position of the ceiling, place it at the end of the blade and note the distance from the trailing edge of the blade to the ceiling.
2、Elevation angle debugging method:
In the same position with a straightedge to test the distance between the end of each blade and the ceiling, test whether the same.
If the blades or angles are not on the same scale then gently bend the leaf holder up or down so that each blade is the same distance from the ceiling.
5. Swap the position of the blades.
1、Exchange debugging method:
Will blade holder, blade exchange position with each other, if the blade is less, exchange the position of adjacent blade, if the blade is more, then exchange the oblique diagonal blade installation, can solve the problem of serious shaking.
2、Equal division commissioning method:
Loosen the screws of the unequal blade holder, tighten the blade holder to the more side and then lock the screws. The motor screw hole itself has already equalized the distance, but the screw locking screw hole will have a false position, the use of equal commissioning method, can solve the problem of slight shaking.
6. Install the balancer.
Purchase balancer, will balance the clip stuck in the edge of the blade, in turn adjust to the blade of one-fifth, one-third and one-half position, and then according to the shaking situation to determine the position of the balance clip in the blade. After the position is determined in the clip opening position stick on the balance block after taking away the balance clip, then complete the installation of the balancer.
The balancer can effectively improve the problem of blade shaking.
The above six methods can help you solve the problem of blade shaking, if your home ceiling fan blade will shake, hurry to try it!
If you are interested, welcome to contact us:
WhatsApp: +86 13144118381
Email: operating@fsshining.com
Web: www.fsshining.com
Foshan Shining Electrical Appliance Co., Ltd.
