I'll show you how to install the ceiling fan safely
Ceiling fan and the ceiling connection is related to the safety of the ceiling fan and the use of the effect, we have to follow the steps and requirements in the installation of assembly, fixed completion. The correct assembly process is divided into the following five steps：
1、Accessories debugging: Prepare a steel ring and a diameter of about 10 mm, about 40 cm long rebar. The rebar needs to be bent into a concave groove shape in the middle part, and the steel ring is bent into a figure of eight for the inner ring.
2、Check the ceiling prefabricated holes: In the ceiling ceiling fan installation location to find the prefabricated panels, reserved for the location of the board with a hole in the measurement of the size and rebar match, if not match the hole will be expanded to allow the rebar into.
3、Installation of accessories: Put the movable part of the rebar into the hole until the concave groove shape part is exposed in the middle of the hole，and seal the holes with cement after sorting out the power lines.
4、Installation of the ceiling fan: The circle above the 8-letter steel circle set in the concave groove at the steel, the circle below the steel circle set on the ceiling fan of the shock-absorbing rubber ring, and then the ceiling fan installation and expansion bolts screwed fixed solid, connected to the power line and speed controller.
5、Check the adjustment: Check whether the ceiling fan rotation is smooth, open the speed controller switch, if there is the phenomenon of swing, it means that the ceiling fan blade horizontal angle is not consistent, this time to adjust the blade horizontal height and angle to the same angle can be.
If you are interested, welcome to contact us:
WhatsApp: +86 13144118381
Email: operating@fsshining.com
Web: www.fsshining.com
Spain Retail Services: www.fswinstep.com
Foshan Shining Electrical Appliance Co., Ltd.
