The operation and replacement of ceiling fan remote controller
Ceiling fan light switches are used to achieve ceiling fan on, off, speed control and lighting fixture on, off, light up the number of lights, etc.. As technology continues to innovate, infrared remote control has been introduced and the results of technology have gradually matured, remote control operation has also been put into various home appliances, and ceiling fan lights have also joined the ranks of remote control operation.
Remote control ceiling fans require a speed governor and a remote control to operate in conjunction. The speed controller is placed inside the ceiling compressor to connect the wires for control and adjustment, while the remote control has operating functions such as wind speed, light, timing and forward and reverse rotation depending on the use of the different ceiling fans.
（Black for receiver, white for transmitter）
Operation: The remote control points to the ceiling fan light (the receiver) and according to the different panels on its panel, select the desired panel and press the button to operate it.
Function: The remote fan control circuit enables control functions such as scheduling, timing, wind type (normal wind, natural wind, sleep wind) and steering in a remote environment.
（Remote control with timer, speed and brightness functions）
Advantages：
1、Easy to use and operate: wall control and pull cord operations often have to be done in a specific position to complete the operation. The remote control is different, you only need to hold a remote control in your hand, and you can operate it within the diameter of the infrared ray that can be received.
2、Rich and diverse functions: ordinary remote control both power switch, open pause, wind speed regulation and light adjustment functions. Upgraded versions such as the CF42-3CS (W) ceiling fan on the basis of this added timing functions, no longer have to worry about the cold wind blowing in the middle of the night to affect the good dream, but also to save power as much as possible, to achieve comfort and energy saving.
（CF42-3CS(W) remote control operation effect）
3、Easy adjustment: the operation process is simple and convenient, corresponding to the different needs of different keys to achieve different functions.
Disadvantage：
The remote control circuit is prone to failure and is more costly to repair than mechanical repairs.
Problems that may arise during use：
1) Turn on the ceiling fan to the maximum wind speed, but the wind is still too small.
1. The speed controller is damaged, need to replace the speed controller.
2. Speed controller and ceiling fan do not match, resulting in poor speed controller, attention should be paid to the selection of matching speed controller.
2) The controller a gear speed normal, and the rest of the gear slower or faster.
The fault arises in the receiver, you can remove the receiver shell, check whether the switch contacts solder joints are good, the transformer draw wire head has no broken wire, short circuit and desoldering and so on.
The following remote controller installation and replacement methods are available：
1. Loosen the screws, open the lifting compressor, unhook the receiver connection wire and remove the receiver.
2. Place the new receiver in the gap, connect the wires, energise it properly and you can install the hanging compressor on it.
Overall, the remote control ceiling fan light is fully functional, a remote control at any time, anywhere, long distance can also complete the operation, while some of the ceiling fan light has been achieved with the mobile phone infrared remote control function to connect, no longer have to worry about finding the remote control or remote control damage, the details of the change, really do technology into life.
If you are interested, welcome to contact us:
WhatsApp: +86 13144118381
Email: operating@fsshining.com
Web: www.fsshining.com
Foshan Shining Electrical Appliance Co., Ltd.
